• Global
  • +1 314 729 0055
  • parts@roeslein.com
Featured product models are standard. Verify part compatibility by checking equipment serial number or your project spare parts list.
Larger or small tank sizes available as needed
Unit of Measure

Specifications

Tank Capacity

N/A 4840 gal18321 L

Filter Type

N/A 3M Cuno cartridge filter housing 3M Micro-Klean III resin bonded filter cartridges

Flow Rates

N/A up to 520 gpmup to 1968 L/min

Standard System Features

Standard System Features

N/A
  • Units are fully tested at Roeslein Modular Fabrication Facility prior to shipping
  • Automatic changeover from Primary to Secondary Cuno Filters
  • Automatic constant supply pressure control to Bodymakers
  • End suction centrifugal main tank pumps
  • Vertical centrifugal pumps at Sump Tank
  • Air Operated Double Diaphragm Pump (AODDP) at Sump Tank for pit/trench scavenging
  • Dosatron positive displacement metering unit for metering Neat Oil with make-up/fill water
  • ifm efector sensors
  • Paul Mueller or Tranter plate and frame heat exchanger(s)
  • Oil Mop LLC rope mop skimmer
  • Two Metering pumps for Biocide and Neat Oil
  • Waste oil separation tank integrated into the top of the main tank with underflow weir for separation of coolant from tramp oil
  • Waste Oil collection tank with AODDP for automatic discharge to waste oil hold/collection tank
  • Automatic Blowdown PLC controlled, solenoid valve activated drain, purge and fill for Cuno Filter Housings
  • System with standard tank volume ships in single container

Controls Overview

Controls Overview

N/A
User control ability
  • Enable and Stop the system
  • Reset Drive/Motor faults
  • Review the overall system status
    • Tank levels & temperature
    • Drive/Motor status
    • Control Valve & Solenoid status
  • Filter s

Controls Filters

Controls - Filters

N/A
User ability
  • Review the differential pressure of the filter in use
  • Reset the status of the filter after cartridge change
Other Features
  • Active Alarm screen
  • Alarm History screen with password protected clearing of ala

Panel Design

Panel Design

N/A
  • Allen-Bradley HMI and Drives
  • Single NEMA4/12 Control Panel with air conditioner mounted on main skid
  • Variable Speed Drives for all main pumps
  • Local Sump Tank control station with pump motor Drives
  • Ethernet communica

Tramp Oil Control / Removal Options

Tramp Oil Control / Removal Options

N/A
  • Micro Dispersed Air Flotation
    • Air bubbles are injected at the bottom of the unfiltered coolant tank to improve the raising of tramp oil droplets to the surface
  • Extended Tank or Satellite Tank
    • Increased residence time
  • Main Tank Coalescer
    • Improved tramp oil removal while retaining more "good" coolant
  • Suparator Tank - Enhanced Tramp Oil Removal
    • Pro-active tramp oil separation through Suparator Tank with increased residence time and oil removal through application of Bernouilli's principle. Removes thin oil films while coalescers require the development of a thick oil film.

Parts

Bearing Parts

N/A , 2 Bolt Flange, 0.50 Bore Bearing (QUOTE)
, 2 Bolt Flange, 0.63 Bore Bearing (QUOTE)
, 2 Bolt Flange, 0.75 Bore Bearing (QUOTE)
, 2 Bolt Flange, 1.00 Bore Bearing (QUOTE)
, 2 Bolt Flange, 1.25 Bore Bearing (QUOTE)
, 2 Bolt Flange, 1.25 Bore Bearing (QUOTE)
, 2 Bolt Flange, 1.50 Bore Bearing (QUOTE)
, 2 Bolt Flange, 0.50 Bore Bearing (QUOTE)
, 2 Bolt Flange, 0.63 Bore Bearing (QUOTE)
, 2 Bolt Flange, 0.75 Bore Bearing (QUOTE)
, 2 Bolt Flange, 1.00 Bore Bearing (QUOTE)
, Discontinued Part Number (QUOTE)